The Turbinator from Knowsley SK – Always providing precision proportioning

In-line water driven foam proportioning pumps have turn out to be increasingly well-liked within the final decade. Their low strain drop and correct foam proportioning over a variety of flows are essential in many systems. But this know-how isn’t simple: the gear available on the market till now may be quite difficult and delicate to contamination and over rushing. The new Turbinator water pushed foam proportioning pump developed by Knowsley SK successfully solves these problems, making this know-how the preferred alternative for a broad range of fire preventing techniques.
Precision proportioning – Always
The Turbinator is a optimistic displacement foam proportioning pump designed for Fixed and Mobile purposes. The unit is pushed by a particular volumetric water motor which is directly coupled to a precision gear foam pump. Because เกจวัดแรงดันน้ำมันเครื่อง of the Turbinator are optimistic displacement units, the ratio of froth concentrate to firewater is mounted over the total operating range. This makes Turbinator the perfect proportioning expertise for systems with totally different flows, corresponding to multi-legged deluge techniques, sprinkler systems and cell large incident equipment.
The Turbinator unit does not require setting up or on-site adjustment – the proportioning rate is achieved at any circulate rate and pressure within the working range.
MAXI Turbinator installed on fixed skid feeding foam pouring techniques on storage tanks and bunds.
Technology constructed to last – Forever
With Turbinator technology, Knowsley launched a flexible, abrasion resistant paddle material within the water motor which supplies the unit its unique wear traits. The usual contamination present in hearth water doesn’t damage the paddles. Overspeed up to 120% of the nominal flow, which can happen throughout automatically controlled activation of large systems, does not harm the unit. In addition, the Turbinator resists dry operating in accordance with NFPA20.
Design and installation: Simple as 1-2-3
The close-coupled design offers a very compact and environment friendly set up with just three connections: fireplace water inlet (1), foam focus inlet (2) and foam solution outlet (3). The unit could be put in instantly into vertical or horizontal piping systems. The Turbinator foam pump delivers 3m suction peak simply, which makes it possible to put in the foam focus tank under the unit set up degree – even with high viscosity concentrates in arctic conditions (thick foams). Simple, value effective atmospheric foam tanks are fine for Turbinator.
With its distinctive low differential strain, Turbinator matches in probably the most complicated methods, even when lengthy pipe runs or static strain loss are involved. Turbinator does not require exterior power provide or management circuits and is safe for any ATEX setting.
The Turbinator is out there in 3 sizes from 500 l/min to 12’000 l/min with proportioning of 1% and 3% with freshwater and saltwater building. Each Turbinator built in our Manchester, UK manufacturing facility is 100 percent functionally examined on a excessive flow check rig via its whole operating vary guaranteeing functionality always.
For more info, go to www.knowsleysk.com
Share

Leave a Comment